Caremaster

TEKA
CAREMASTER, 2 m arm hose type, internal joints

Mobile welding fumes filter. Appropriate to fumes suction during welding jobs with unalloyed steels and precious metals. 


This mobile welding fumes filter has a separation efficiency of ≥ 99 %.

The unit corresponds to the security requirements for units of the welding fume category W3 (high-alloyed steels). When handling the unit correctly, you can use it for circulating air operation because it fulfils the requirements for the exceptional rules according to the new hazardous substances ordinance.

A stable construction made of steel plate with continuous powder coating guarantees a low maintenance even under rough conditions.


The gross particles are separated in the pre-filter. Afterwards the air is guided through the particle filter where even finest fumes and dusts are separated. The lifting device guarantees an absolute impermeability and therefore the separation efficiency of the filter unit.

The air is evacuated on the backside of the unit through an outlet grill and rises up. Thus, at a distance of 1 m you cannot perceive a disturbing air flow any more.

The unit is fitted with a high-capacity fan with high negative pressure which guarantees a high volumetric flow even if the filter is saturated. 

Caremaster
Product Specification

TECHNICAL DATA:

Max. volumetric flow of the fan [m³/h]: 2.500
Max. pressure [Pa]: 2.500
Engine performance [kW]: 1,1
Voltage [V]: 400
Power Frequency [Hz]: 50
Current consumption [A]: 2,5
Sound level [dB(A)]: 75
Weight [kg]: 120
Height [mm]: 995
Depth [mm]: 681
Width [mm]: 665
Diameter [mm]: 160
Separation efficiency [%]: ≥ 99

 


 

SPARE PARTS:

Particle filter F9
HEPA filter with filter class F9 in a stable wooden frame
Pre-filter mats F5
Filter mats with filter class F5 (10 pieces)

 

 


 

ACCESSORIES:



Activated carbon filter
Replaceable housing filled with approx. 14 kg activated carbon


Aluminum pre-filter, height 15 mm

Multi-layer aluminum filter
Lighting kit for 1 suction arm
Suitable for suction arms of mobile and stationary units
On/off switch via suction hood for 1 suction arm
Suitable for suction arms of mobile and stationary units

Spark latch with copper lamellas

For mobile units

Particle filter H13, 186 mm height

HEPA filter with filter class H13 in a stable wooden frame

Particle filter H13, 292 mm height

HEPA filter with filter class H13 in a stable wooden frame

Auto start-stop for 400V - units

Equipped with magnetic field sensor